Sandy Foundation Pros
Patio Lifting in Sandy, UT
Patio lifting in Sandy, UT corrects sunken and pooling slabs with polyurethane foam injection. Same-day lifts, free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Sandy and nearby communities.
Backyard patio slabs in Sandy collect more snowmelt runoff than most homeowners expect, and that runoff slowly erodes the soil underneath the slab until it settles unevenly. The result is usually a low spot that holds water after every storm, or a tilt that sends water toward the house instead of away from it.
Sandy Foundation Pros lifts and re-slopes sunken patio slabs with polyurethane foam, correcting both the elevation and the drainage direction in the same visit.
What's included
What's included with Patio Lifting
Typically included: slab assessment, drill holes, foam injection, re-slope to drain away from the house, hole patching.
Optional: joint resealing, surface sealant, soil correction at the patio edge.
Customer prep: clear furniture, planters, and grills from the patio before the visit.
Want a clearer scope?
Get a Free EstimateHow it works
How our Patio Lifting process works
Step 1Patio Assessment
Uneven or settled patio sections are identified for repair.
Step 2Access Point Drilling
Small holes are made at key points across the patio surface.
Step 3Foam Injection
Expanding material is injected to raise the settled sections.
Step 4Level Verification
Elevation is checked throughout the lifting process for accuracy.
Step 5Hole Patching
Access points are filled and smoothed to match the patio surface.
Step 6Final Walkthrough
The patio is inspected to confirm a level, stable finish.
Materials
Materials and methods for Patio Lifting
Patios tend to pool water at low spots after snowmelt, so re-sloping matters as much as the lift itself.
Polyurethane Foam
Lifts the slab with minimal disruption to surrounding landscaping or planting beds.
Patch Compound
Fills and finishes the drilled access holes to blend with the patio surface.
Joint Filler
Restores expansion joints disturbed by the injection process.
Surface Sealant
Protects the lifted area from the next season's moisture exposure.
Leveling Tools
Confirm the slab is pitched to drain away from the house, not toward it.
Bonding Agent
Improves adhesion between the patch and the existing concrete.
Questions on materials?
Get a Free EstimateTimeline
How long does a Patio Lifting take?
Most patio lifts finish in a single visit and the area is usable again the same day.
- 01
Consult and assessment
same day - 02
Foam injection and lift
1–2 hours - 03
Patching
same visit
- 04
Cure to usable
a few hours
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Patio Lifting
Check with Sandy City or Salt Lake County if the patio work overlaps with a covered structure or addition.
| Typically needs a permit | Often no permit |
|---|---|
| New patio pours or full slab replacement | Lifting an existing patio slab |
| Covered patio structures tied into the lifting work | Resealing joints after a lift |
| — | Minor surface patching |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Patio Lifting
| DIY | Hire a pro |
|---|---|
| Patching a small surface crack on an otherwise level patio is a reasonable DIY task | A DIY patch compound fills the surface but doesn't correct the slope causing the pooling |
| Clearing debris from joints between slabs is fine routine upkeep | Lifting and re-sloping solves the actual drainage problem, not just the cosmetic crack |
| — | Getting the pitch right so water drains away from the house needs measured, monitored lifting |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Patio Lifting
Call Sandy Foundation Pros for a free estimate before the next wet season.
- Standing water on the patio after rain or snowmelt
- Uneven slab seams or a noticeable tilt
- A patio surface that slopes toward the house instead of away from it
- Cracking along a settled edge of the slab
Seeing warning signs?
Get a Free EstimateFAQs
Patio Lifting FAQs
How much does patio lifting cost in Sandy?
Cost depends on slab square footage and how much the patio has settled. It's typically a fraction of tearing out and re-pouring.
Is polyurethane lifting cheaper than replacing a patio slab?
Yes, . Foam injection avoids demo and disposal costs tied to a full replacement.
How long does patio lifting take?
Most jobs finish in a single visit, with the patio usable again within a few hours.
Do I need a permit to lift a patio slab?
Lifting an existing slab usually doesn't require a permit. New pours or covered structure work sometimes does.
Why does my patio pool water after it rains?
Soil erosion under the slab, often from snowmelt runoff, causes it to settle unevenly and create a low spot that collects water.
Will the patio stay level after lifting?
A properly filled void and corrected slope should hold, though continued drainage issues at the same spot can affect it over time.
What's included in a patio lifting job?
Slab assessment, foam injection, re-sloping toward proper drainage, and hole patching. Joint resealing is usually optional.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Sandy, UT: piering, crack sealing, and wall stabilization backed by a written estimate. Free estimates.
Piering and Underpinning
Piering and underpinning in Sandy, UT with steel push piers and helical piers. Written scope, free estimates.
Wall Stabilization
Basement wall stabilization in Sandy, UT with steel anchors, carbon fiber, and I-beam bracing. Free estimates on bowing wall repair.
Ask about Patio Lifting
Tell us about the project and how to reach you.